|
Visits: 85222348 AMS now reading: 1
|
|
|
|
|
|
|
Schindler I., Bílovský P., Kubina T., Dänemark J., Radina M., Silbernagel A., Šarovský J., Kučera K. |
CONTROLLED ROLLING OF A ST52-3 STEEL AT THE LABORATORY MILL TANDEM |
Keywords: flat rolling simulation|laboratory rolling mill|plain-carbon steel|microstructure|mechanical properties|technology optimization| |
No 4 (2000), p. 336-344 |
|
|
Mohyla P., Koukal J. |
CHANGES OF MECHANICAL PROPERTIES IN 0,5CR-0,5MO-0,3V STEEL WELDS AFTER LONG TERM EXPOSITION AT HIGH TEMPERATURES |
Abstract
Low - alloyed CrMoV steels serve in power and chemical systems at temperatures between 400 and 580°C. This corresponds to the creep as well as sub-creep range. Estimation of residual life after projected exposition seems to be a major economical and technical problem. Up to the present time, the model used for estimation of residual life does not consider changes of microstructure influencing mechanical properties. Especially mechanical properties of welds are influenced by long-term high-temperature exposition. During exposition of 0.5Cr-0.5Mo-0.3V steel (15 128) at temperatures below the creep range secondary hardening can be expected. During exposition of this steel in the creep range, a considerable fall of yield strength and hardness of welds and also parent material is observed.
|
Keywords: low-alloyed steel|CrMoV steel welds|the creep range|the sub-creep range|secondary hardening|coagulation|coarsening|additional precipitation| |
No 4 (2000), p. 396-404 |
|
|
|
|
|
|