Visits: 6396675
AMS now reading: 1




Year 2000 No 4

Vallová S., Slovák V., Leško J.
THERMAL OXIDATION OF FINE GRAINED CARBONACEOUS MATERIALS IN THE PRESENCE OF ZN(II), FE(III) AND PB(II) COMPOUNDS
Keywords: thermal oxidation|coke|graphite|TG|kinetics|
No 4 (2000), p. 304-309
  mag01.pdf (93 kB)
mag01_eng.txt (983 B)  

Kulveitová H., Seidlerová J., Leško J.
RELATION BETWEEN THE ZN(II) CHEMICAL SPECIATION AND ITS ACID LEACHING FROM FINE GRAINED METALLURGICA
Keywords: metallurgical wastes|chemical speciation|acid leaching|
No 4 (2000), p. 310-317
  mag02.pdf (102 kB)
mag02_eng.txt (1 kB)  

Pavliska J., Jonšta Z., Mazancová E., Mazanec K.
MICROSTRUCTURE AND METALLURGY INVESTIGATION OF THE HOT DUCTILITY BEHAVIOUR OF STEELS
Keywords: residual element|transverse cracks|localised deformation|hot ductility|intergranular ferrite|acicular ferrite|
No 4 (2000), p. 318-326
  mag03.pdf (161 kB)
mag03_eng.txt (965 B)  

Sojka J., Hyspecká L.
ROLE OF THE MICROSTRUCTURE IN HYDROGEN INDUCED CRACKING OF CARBON - MANGANESE STEELS
Keywords: carbon manganese steel|heat treatments|microstructure|pearlitic bands|hydrogen induced cracking|
No 4 (2000), p. 327-335
  mag04.pdf (209 kB)
mag04_eng.txt (855 B)  

Schindler I., Bílovský P., Kubina T., Dänemark J., Radina M., Silbernagel A., Šarovský J., Kučera K.
CONTROLLED ROLLING OF A ST52-3 STEEL AT THE LABORATORY MILL TANDEM
Keywords: flat rolling simulation|laboratory rolling mill|plain-carbon steel|microstructure|mechanical properties|technology optimization|
No 4 (2000), p. 336-344
  mag05.pdf (214 kB)
mag05_eng.txt (646 B)  

Dobrovský Ľ., Kopečný M., Kostiuková G., Dobrovská J.
UTILIZATION OF THE SECONDARY SUBSTANCES IN THE TECHNOLOGICAL ROUTES OF PRETREATMENT OF PIG IRON
Keywords: preliminary treatment of pig iron|desulphurization|dephosphorization|slags|
No 4 (2000), p. 345-352
  mag06.pdf (189 kB)
mag06_eng.txt (641 B)  

Macoszek M., Brožová S., Kafka V., Bůžek Z.
POSSIBLE WAYS OF PLASMA HEATING FOR PROCESSING THE METAL-BEARING OXIDIC WASTES
Keywords: metal-bearing oxidic wastes|plasma heating|economical efficiency|calculated and processing costs|profit and profitability|
No 4 (2000), p. 353-362
  mag07.pdf (210 kB)
mag07_eng.txt (2 kB)  

Tomčík P., Hrubý J.
THE ACTION OF AC MAGNETIC FIELD ON COLD FORMING PROCESS AND COMPARISON OF FLOW STRESS CURVES
Keywords: magnetic domains|magnetostriction|electromagnetic volume power|change of the magnetic flux density in time|
No 4 (2000), p. 363-368
  mag08.pdf (199 kB)
mag08_eng.txt (466 B)  

Bajger Z., Michalec J., Kret J., Bajgerová D.
CONTRIBUTION TO METALLURGICAL TECHNOLOGY CONTROL PROBLEMS
Keywords: proceedings of metallurgical technologies|emissions|analysis of gases|kinetic equations|
No 4 (2000), p. 369-374
  mag09.pdf (157 kB)
mag09_eng.txt (721 B)  

Mohyla M., Kristofory F., Vítek J.
ELECTROFORMING - A PART OF ENGINEERING PLATING PROCESSES (TREATISE ON USE OF NICKEL ALLOYS)
Keywords: galvanic precipitation|electroforming|NiFe|NiCo alloys|metal models|
No 4 (2000), p. 375-379
  mag10.pdf (183 kB)
mag10_eng.txt (566 B)  

Podjuklová J., Mohyla M.
CONTRIBUTION TO THE STUDY OF THE PHASE BOUNDARY BETWEEN THE VITREOUS AND METALLIC PHASE
Keywords: phase boundary|metal|vitreous enamel|intermediate layer|cluster complex|
No 4 (2000), p. 380-387
  mag11.pdf (162 kB)
mag11_eng.txt (558 B)  

Vodárek V., Strang A.
MICROSTRUCTURAL CHANGES IN 12CrMoVNb STEELS DURING CREEP AT 550 C
Keywords: strengtht and toughness|creep properties|life degradation|substructural changes during ageing|
No 4 (2000), p. 388-395
mag12_eng.txt (1 kB)  

Mohyla P., Koukal J.
CHANGES OF MECHANICAL PROPERTIES IN 0,5CR-0,5MO-0,3V STEEL WELDS AFTER LONG TERM EXPOSITION AT HIGH TEMPERATURES
Keywords: low-alloyed steel|CrMoV steel welds|the creep range|the sub-creep range|secondary hardening|coagulation|coarsening|additional precipitation|
No 4 (2000), p. 396-404
  mag13.pdf (207 kB)
mag13_eng.txt (810 B)