Visits: 85905876
AMS now reading: 1




Year 2005 No 1

Blacha L.
THE KINETICS OF ZN EVAPORATION FORM CU-ZN ALLOYS
Abstract
In the process of metals and alloys smelting often occurs an excessive evaporation of compounds. The evaporation of metal depends on the following factors: kind of applied apparatus, temperature, bath composition and gaseous atmosphere.
In the research were presented the results of kinetics of Zn evaporation from Cu-Zn alloys.
The investigation were carried out in the temperature of 1373 and 1413K, CO, Ar and He atmosphere and following Zn contents in the alloys: 16,19; 20,61 and 25,54%.
On the base of the obtained values of Zn mass transfer coefficients and evaporation rate constants the conclusion was made, that in the area of investigation the process of Zn evaporation from Cu-Zn alloy run under a diffusion control and was determined by the mass transport in the gaseous phase.



Keywords: metallurgy|alloys|metal evaporation
No 1 (2005), p. 7-13
  mag01.pdf (166 kB)
mag01_eng.txt (815 B)  

Fouad O. A.
UPGRADING OF A LOW-GRADE TITANIUM SLAG BY SULPHATION ROASTING TECHNIQUE TO PRODUCE SYNTHETIC RUTILE
Keywords: ilmenite|titanium slag|sulphation roasting|synthetic rutile
No 1 (2005), p. 14-24
  mag02.pdf (764 kB)
mag02_eng.txt (1 kB)  

Wangyao P., Korath T., Harnvirojkul T., Krongtong V., Homkajai W.
THE SEM STUDY OF MICROSTRUCTURAL RESTORATION BY RE-HEAT TREATMENTS IN CAST SUPERALLOY TURBINE BLADE
Keywords: Microstructural Refurbishment|Rejuvenation|Re-Heat Treatment|Superalloys|Lifetime Extension|IN-738
No 1 (2005), p. 25-35
  mag03.pdf (2 MB)
mag03_eng.txt (2 kB)  

Ševčík A., Ševčíková J.
HIGH TEMPERATURE PROPERTIES AND SURFACE DEFECTS OF SLABS OF LOW CARBON STEELS IN THE AS - CAST STATE
Keywords: low carbon steels|slabs|high temperature strength|hot ductility|surface defects|grain boundary weakening|fracture|
No 1 (2005), p. 36-44
  mag04.pdf (1 MB)
mag04_eng.txt (1 kB)  

Gawad J., Madej L., Szeliga D., Pietrzyk M.
CELLULAR AUTOMATON TECHNIQUE AS A TOOL FOR A COMPLEX ANALSIS OF THE MICROSTRUCTURE EVOLUTION AND RHEOLOGICAL BEHAVIOUR
Keywords: cellular automata|internal variable model|dynamic recrystallization|
No 1 (2005), p. 45-53
  mag05.pdf (535 kB)
mag05_eng.txt (1 kB)  

Lothongkum G., Ratanamahasakul S., Wangyao P.
EFFECT OF HEAT TREATMENT CONDITIONS ON DYNAMIC PARAMETERS OF SECONDARY CARBIDE PRECIPITATION IN CENTRIFUGALLY CAST IRON-BASE SUPERALLOY
Keywords: Microstructural characterization|centrifugally cast Iron-base superalloy|Fe - Ni - Cr Alloy|Time - Temperature - Precipitation (TTP) diagram|
No 1 (2005), p. 54-61
  mag06.pdf (835 kB)
mag06_eng.txt (2 kB)  

Podrábský T., Juliš M., Pospíšilová S., Němec K., Hrbáček K., Rek A., Jonšta Z.
CHANGES IN MICROSTRUCTURE OF TURBINE WHEEL MADE OF INCONEL 713 LC
Keywords: cast nickel alloys|turbine wheel blades|grain boundaries|cracks|scanning electron microscopy|microstructure
No 1 (2005), p. 62-67
  mag07.pdf (1 MB)
mag07_eng.txt (839 B)  

Podrábský T., Stránský K., Pospíšilová S., Rek A., Dobrovská J., Juliš M.
HETEROGENEITY ALLOY OF INCONEL 713 LC
Keywords: cast nickel alloy|chemical heterogeneity|mathematical-statistical analysis|
No 1 (2005), p. 68-73
  mag08.pdf (384 kB)
mag08_eng.txt (1 kB)  

Molnár F., Čech J.
POSSIBILITITIES OF ZN-AL ALLOY PREPARATION BY REFINING OF HARD ZINC APPART IRON BY ALUMINIUM
Keywords: refining|hard zinc|intermetallic compound FeAl|FeAl3|directional solidification|hot pressing|
No 1 (2005), p. 74-77
  mag09.pdf (147 kB)
mag09_eng.txt (1 kB)  

Rabatin Ľ., Vadász P., Tomášek K.
REFINING ELECTROLYSIS OF THE SECONDARY SILVER ALLOYS
Keywords: silver|electrolysis|silver refining|
No 1 (2005), p. 78-87
  mag10.pdf (310 kB)
mag10_eng.txt (2 kB)  

Pecha J.
EFFECT OF HEAT TREATMENT ON MICRUSTRUCTURE AND PROPERTIES OF HIGH-CHROME STEEL USED IN POWER ENGINEERING
Keywords: heat resistance|spinels|brittle|ferit|austenit|structure|carbid|difraction|Cr equivalent|toughness|
No 1 (2005), p. 88-103
  mag11.pdf (812 kB)
mag11_eng.txt (3 kB)  

Cehlár M., Mihok J., Kyseľová K., Bohušová V.
IMPORTANCE OF KOSOVO LIGNITE DEPOSITS EVALUATION BY FORM OF INVESTMENT EFFICIENTY IN CREATED MARKET ECONOMY
Keywords: lignite mines|economic analysis|investment efficienty|
No 1 (2005), p. 104-115
  mag12.pdf (968 kB)
mag12_eng.txt (2 kB)  

Mišičko R.
CRACKING THEORIES AND HYPOTHESES OF CONTINUOUSLY CAST PRODUCTS
Keywords: cracking|brittlenes|crack|mechanism|surface skin|
No 1 (2005), p. 116-125
  mag13.pdf (476 kB)
mag13_eng.txt (2 kB)  

Kapustová M.
THE MATHEMATICAL MODEL FOR COMFORT AT WORK DETERMINATION IN ENGINEERING PRODUCTION
Keywords: working load|workplace|summary load|mathematical model|comfort at work|
No 1 (2005), p. 126-133 Vydáva eBooks
  mag14.pdf (272 kB)
mag14_eng.txt (2 kB)