Visits: 86113374
AMS now reading: 1




Year 2010 No 4

K. Stransky, F. Kavicka, B. Sekanina, J. Stetina, T. Mauder, L. Stransky
THE EFFECT OF ELECTROMAGNETIC STIRRING ON THE CRYSTALLIZATION OF CONCAST BILLETS
Keywords: steel billets|concast|crystallization|elektromagnetic stirring|
No 4 (2010), p. 216-222
  mag01.pdf (223 kB)
mag01_eng.txt (987 B)  

F. Dobeš
THE INFLUENCE OF HEAT-TREATMENT ON CREEP RESISTANCE OF Fe–Al ALLOYS WITH ADDITIONS OF NIOBIUM AND CARBON
Keywords: creep|high temperature deformation|intermetallics|iron aluminides|
No 4 (2010), p. 223-228
  mag02.pdf (106 kB)
mag02_eng.txt (489 B)  

S. Rusz, S. Tylšar, J. Kedroň, J.Dutkiewicz, T. Donič
ENHANCEMENT OF EFFICIENCY OF SPD PROCESS BY APPLICATION OF NEW GEOMETRY OF ECAP TOOL
Keywords: severe plastic deformation|hardness test|TEM|aluminium alloys|
No 4 (2010), p. 229-236
  mag03.pdf (565 kB)
mag03_eng.txt (870 B)  

Po-Chou Lin, Song-Jeng Huang, Pin-Sen Hong
FORMATION OF MAGNESIUM METAL MATRIX COMPOSITES Al2O3 P/AZ91D AND THEIR MECHANICAL PROPERTIES AFTER HEAT TREATMENT
Keywords: metal-matrix composites|magnesium alloy|nano-scaled aluminum oxide pellet|heat treatment|
No 4 (2010), p. 237-245
  mag04.pdf (321 kB)
mag04_eng.txt (1 kB)  

Song-Jeng Huang, Zhong-Wei Chen
MICROSTRUCTURE OF AlN PARTICLES REINFORCED AZ91D Mg-BASED METAL-MATRIX COMPOSITES
Abstract
This paper investigated the microstructure of AlN particles reinforced AZ91D Mg-based metal-matrix composites (MMCs). The AZ91D is initially placed inside a graphite crucible and heated to 680-700°C in a resistance-heated furnace. The molten alloy is stirred with a vane operated at 350 rev./min for 3 minutes. Preheated AlN particles are simultaneously added to the stirred alloy with addition of 1, 2 and 5 wt. % of 1 ?m AlN particles. The microstructure of the AZ91D and AlNp reinforced AZ91D Mg MMCs specimens were observed by optical microscope. The mean grain size was determined using the linear intercept method. The clear microstructure of the eutectic structure is observed by polarization microscope. It was found that the ?-phase Mg was almost eliminated through homogenization by SEM observation.

Keywords: metal-matrix composites|homogenization|eutectic solidification|
No 4 (2010), p. 246-253
  mag05.pdf (881 kB)
mag05_eng.txt (824 B)  

J. Przondziono, W.Walke, E. Hadasik, B. Jasiński
ELECTROCHEMICAL CORROSION OF MAGNESIUM ALLOY AZ31 IN NaCl SOLUTIONS
Keywords: magnesium alloy AZ31|electrochemical corrosion|potentiodynamic tests|anodic polarisation curves|
No 4 (2010), p. 254-260
  mag06.pdf (154 kB)
mag06_eng.txt (756 B)  

E. Hadasik, D. Kuc
DEFORMATION MODE IN AZ31 MAGNESIUM ALLOY DURING COMPRESSION TESTS
Keywords: magnesium alloy|high temperature deformation|dynamic recrystallization|slip|twinning|
No 4 (2010), p. 261-267
  mag07.pdf (299 kB)
mag07_eng.txt (828 B)  

T. Kvačkaj, J. Bacsó, J. Bidulská, M. Lupták, I. Pokorný, M. Kvačkaj, M. Vlado
INFLUENCE OF CRYO AND CLASSIC ROLLING CONDITIONS ON PROCCESING PARAMETERS OF C-Si STEEL
Keywords: C-Si steel|cryo rolling|rolling force|normal rolling pressure|statistical method|
No 4 (2010), p. 268-276
  mag08.pdf (130 kB)
mag08_eng.txt (807 B)