Visits: 82768665
AMS now reading: 1




Year 2012 No 1

M. Matvija, M. Fujda, O. Milkovič, T. Kvačkaj, M. Vojtko, P. Zubko, R. Kočiško
THE EFFECT OF ECAP AND SUBSEQUENT POST-ECAP ANNEALING ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AlSi7Mg0.3 ALLOY
Keywords: aluminium alloys|ECAP|annealing|microstructure|mechanical properties|
No 1 (2012), p. 4-12
  mag01.pdf (708 kB)
mag01_eng.txt (781 B)  

D. Jakubéczyová, M. Hagarová, J. Savková
EVALUATION OF PROPERTIES OF MULTILAYER AND MULTICOMPONENT PVD COATINGS DEPOSITED ON THE CUTTING TOOLS PRODUCED BY POWDER METALLURGY
Abstract
The paper deals with the evaluation of properties of the thin PVD layers applied on the tools made by powder metallurgy. This PVD technology belongs to the modern methods of depositing thin layers onto the surface of machine (tools and tool parts). Technological methods of the deposition process of thin layers are constantly improved. At present new types of layers are developed. The evaluation of structure, composition and properties of layers were controlled during whole coating process. TiAlN layer and nanocomposite layer used increase the life-time of cutting tools. So, there is important to analyse the coated material behaviour under the contact conditions. Thin AlTiN multilayer was deposited by ARC technology and nanocomposite layer nc-AlTiN/Si3N4 by LARC technology. The properties of the system thin layer - steel substrate were tested by roughness, hardness measuring and by pin-on-disc test at room and elevated temperatures. These properties were tested using Atomic force microscope (AFM), Vickers indenter, Calotest and Pin-on-disc tribometer. The HV0.5 hardness values were 21.5 ? 2.5 GPa for AlTiN multilayer and 23.9 ± 0.7 GPa for nACo layer. Values of coefficient of friction for nACo layer were lower those for AlTiN layer. Analysis of the employed coating systems indicates their possible applications on selected type of powder metallurgy steel tools and a possibility for an increase of the lifetime under working conditions.

Keywords: PVD|layer|properties|AFM|Pin-on-disc|
No 1 (2012), p. 13-19, Vydáva eBooks
  mag02.pdf (694 kB)
mag02_eng.txt (1 kB)  

J. Brezinová, A. Guzanová, I. Mamuzić
STUDY OF WEAR RESISTANCE OF COATINGS DEPOSITED BY HIGH VELOCITY OXYGEN FUEL (HVOF) TECHNOLOGY
Keywords: HVOF spraying|HVOF coatings|adhesion|erosion|thermal loading|
No 1 (2012), p. 20-27
  mag03.pdf (417 kB)
mag03_eng.txt (1 kB)  

T. Borovský, J. Kijac, B. Buľko, M. Domovec, J. Havran
THE INFLUENCE OF SLAG COMPOSITION ON THE DISTRIBUTION OF MANGANESE BETWEEN SLAG AND METAL IN THE ELECTRIC ARC FURNACE
Keywords: manganese|steel|slag|electric arc furnace|
No 1 (2012), p. 28-33
  mag04.pdf (170 kB)
mag04_eng.txt (671 B)  

J. Pirošková, J. Trpčevská, B. Hlucháňová, M. Laubertová
FLUX SKIMMINGS ORIGINATED DURING HOT-DIP GALVANIZING PROCESS AND ITS HYDROMETALLURGICAL PROCESSING
Keywords: flux skimming|hydrometallurgy|hot-dip galvanizing|
No 1 (2012), p. 34-39
  mag05.pdf (307 kB)
mag05_eng.txt (1 kB)  

M. Laciak, M. Durdán, J. Kačur
UTILIZATION OF INDIRECT MEASUREMENT IN THE ANNEALING PROCESS OF THE STEEL COILS
Keywords: annealing|indirect measurement|steel coil|mathematical model|
No 1 (2012), p. 40-49
  mag06.pdf (521 kB)
mag06_eng.txt (991 B)